Santana 26

From Wikipedia, the free encyclopedia

Santana 26
Development
DesignerSeymour Paul
LocationUnited States
Year1971
No. built83
Builder(s)W. D. Schock Corp
RoleCruiser
NameSantana 26
Boat
Displacement5,060 lb (2,295 kg)
Draft5.00 ft (1.52 m)
Hull
Typemonohull
Constructionfiberglass
LOA26.17 ft (7.98 m)
LWL21.08 ft (6.43 m)
Beam7.92 ft (2.41 m)
Engine typeoutboard motor
Hull appendages
Keel/board typefin keel
Ballast2,400 lb (1,089 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height33.60 ft (10.24 m)
J foretriangle base11.66 ft (3.55 m)
P mainsail luff28.00 ft (8.53 m)
E mainsail foot10.00 ft (3.05 m)
Sails
Sailplanmasthead sloop
Mainsail area140.00 sq ft (13.006 m2)
Jib/genoa area195.89 sq ft (18.199 m2)
Total sail area335.89 sq ft (31.205 m2)

The Santana 26 is an American trailerable sailboat that was designed by W. D. Schock Corp's in-house designer, Seymour Paul, as a cruiser and first built in 1971.[1][2][3][4][5][6]

Production[edit]

The design was built by W. D. Schock Corp in the United States, from 1971 until 1974, with 83 boats completed over its four-year production run.[1][2][7][8][9]

Design[edit]

The Santana 26 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a nearly-plumb transom, a spade-type rudder controlled by a tiller and a fixed fin keel or optional swing keel.

The boat is normally fitted with a small outboard motor for docking and maneuvering.[1][2]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and a drop-down dinette table that forms double berth on the port side. The galley is located on the starboard admidships. The galley is equipped with a two-burner stove, ice box and a sink. The head is located just aft of the bow cabin on the port side.[1][2]

For sailing the design cane be equipped with a number of jibs or genoas.[2]

The design has a hull speed of 6.15 kn (11.39 km/h).[2]

Variants[edit]

Santana 26
This fixed keel model was introduced in 1971. It displaces 5,060 lb (2,295 kg) and carries 2,400 lb (1,089 kg) of ballast. The boat has a draft of 5.00 ft (1.52 m) with the standard keel.[1][2]
Santana 26 SK
This swing keel model was also introduced in 1971. It displaces 4,460 lb (2,023 kg), carries 1,800 lb (816 kg) of ballast and has a mast that is about 2.6 ft (0.79 m) shorter than the fixed keel model. The boat has a draft of 4.50 ft (1.37 m) with the keel down and 2.75 ft (0.84 m) with it retracted, allowing operation in shallow water, or ground transportation on a trailer.[3][4]

See also[edit]

References[edit]

  1. ^ a b c d e McArthur, Bruce (2022). "Santana 26 sailboat". sailboatdata.com. Archived from the original on 6 August 2022. Retrieved 6 August 2022.
  2. ^ a b c d e f g Sea Time Tech, LLC (2022). "Santana 26". sailboat.guide. Archived from the original on 6 August 2022. Retrieved 6 August 2022.
  3. ^ a b McArthur, Bruce (2022). "Santana 26 SK sailboat". sailboatdata.com. Archived from the original on 6 August 2022. Retrieved 6 August 2022.
  4. ^ a b Sea Time Tech, LLC (2022). "Santana 26 SK". sailboat.guide. Archived from the original on 6 August 2022. Retrieved 6 August 2022.
  5. ^ McArthur, Bruce (2022). "Seymour Paul". sailboatdata.com. Archived from the original on 18 December 2021. Retrieved 6 August 2022.
  6. ^ Sea Time Tech, LLC (2022). "Seymour Paul". sailboat.guide. Archived from the original on 19 July 2022. Retrieved 6 August 2022.
  7. ^ McArthur, Bruce (2022). "Schock W.D." sailboatdata.com. Archived from the original on 18 July 2020. Retrieved 6 August 2022.
  8. ^ Sea Time Tech, LLC (2022). "Schock W.D." sailboat.guide. Archived from the original on 23 December 2021. Retrieved 6 August 2022.
  9. ^ W. D. Schock Corp. "Boats built by W.D. Schock". wdschock.com. Archived from the original on 21 February 2010. Retrieved 9 August 2022.

External links[edit]