Renewable energy

Burbo Bank Offshore Wind Farm, at the entrance to the River Mersey in North West England.

American President Barack Obama speaks at the DeSoto Next Generation Solar Energy Center, in the USA.

Renewable energy is energy which comes from natural resources such as sunlight, wind, rain, tides, and geothermal heat, which are renewable (naturally replenished). In 2006, about 18% of global final energy consumption came from renewables, with 13% coming from traditional biomass, which is mainly used for heating, and 3% from hydroelectricity. New renewables (small hydro, modern biomass, wind, solar, geothermal, and biofuels) accounted for another 2.4% and are growing very rapidly. The share of renewables in electricity generation is around 18%, with 15% of global electricity coming from hydroelectricity and 3.4% from new renewables.

Wind power is growing at the rate of 30% annually, with a worldwide installed capacity of 157,900 megawatts (MW) in 2009, and is widely used in Europe, Asia, and the United States. The annual manufacturing output of the photovoltaics industry reached 6,900 MW in 2008, and photovoltaic (PV) power stations are popular in Germany and Spain. Solar thermal power stations operate in the USA and Spain, and the largest of these is the 354 MW SEGS power plant in the Mojave Desert. The world's largest geothermal power installation is The Geysers in California, with a rated capacity of 750 MW. Brazil has one of the largest renewable energy programs in the world, involving production of ethanol fuel from sugar cane, and ethanol now provides 18% of the country's automotive fuel. Ethanol fuel is also widely available in the USA.

While most renewable energy projects and production is large-scale, renewable technologies are also suited to small off-grid applications, sometimes in rural and remote areas, where energy is often crucial in human development. Kenya has the world's highest household solar ownership rate with roughly 30,000 small (20–100 watt) solar power systems sold per year.

Mainstream forms of renewable energy

2008 worldwide renewable-energy sources. Source: REN21

Renewable energy flows involve natural phenomena such as sunlight, wind, tides and geothermal heat, as the International Energy Agency explains:

Renewable energy is derived from natural processes that are replenished constantly. In its various forms, it derives directly from the sun, or from heat generated deep within the earth. Included in the definition is electricity and heat generated from solar, wind, ocean, hydropower, biomass, geothermal resources, and biofuels and hydrogen derived from renewable resources.

Each of these sources has unique characteristics which influence how and where they are used.

Wind power

See also: Wind power, Wind farm, and Wind power in the United States

Airflows can be used to run wind turbines. Modern wind turbines range from around 600 kW to 5 MW of rated power, although turbines with rated output of 1.5–3 MW have become the most common for commercial use; the power output of a turbine is a function of the cube of the wind speed, so as wind speed increases, power output increases dramatically. Areas where winds are stronger and more constant, such as offshore and high altitude sites, are preferred locations for wind farms. Typical capacity factors are 20-40%, with values at the upper end of the range in particularly favourable sites.

Globally, the long-term technical potential of wind energy is believed to be five times total current global energy production, or 40 times current electricity demand. This could require large amounts of land to be used for wind turbines, particularly in areas of higher wind resources. Offshore resources experience mean wind speeds of ~90% greater than that of land, so offshore resources could contribute substantially more energy. This number could also increase with higher altitude ground-based or airborne wind turbines.

Wind power is renewable and produces no greenhouse gases during operation, such as carbon dioxide and methane.

Hydropower

See also: Hydroelectricity and Hydropower

The Hoover Dam when completed in 1936 was both the world's largest electric-power generating station and the world's largest concrete structure.

Energy in water can be harnessed and used. Since water is about 800 times denser than air, even a slow flowing stream of water, or moderate sea swell, can yield considerable amounts of energy. There are many forms of water energy:

• Hydroelectric energy is a term usually reserved for large-scale hydroelectric dams. Examples are the Grand Coulee Dam in Washington State and the Akosombo Dam in Ghana.
• Micro hydro systems are hydroelectric power installations that typically produce up to 100 kW of power. They are often used in water rich areas as a remote-area power supply (RAPS). There are many of these installations around the world, including several delivering around 50 kW in the Solomon Islands.
• Damless hydro systems derive kinetic energy from rivers and oceans without using a dam.
• Ocean energy describes all the technologies to harness energy from the ocean and the sea. This includes marine current power, ocean thermal energy conversion, and tidal power.

Solar energy

See also: Solar energy, Solar power, and Solar thermal energy

Monocrystalline solar cell.

Solar energy is the energy derived from the sun through the form of solar radiation. Solar powered electrical generation relies on photovoltaics and heat engines. A partial list of other solar applications includes space heating and cooling through solar architecture, daylighting, solar hot water, solar cooking, and high temperature process heat for industrial purposes.

Solar technologies are broadly characterized as either passive solar or active solar depending on the way they capture, convert and distribute solar energy. Active solar techniques include the use of photovoltaic panels and solar thermal collectors to harness the energy. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light dispersing properties, and designing spaces that naturally circulate air.

Biomass

Biomass (plant material) is a renewable energy source because the energy it contains comes from the sun. Through the process of photosynthesis, plants capture the sun's energy. When the plants are burned, they release the sun's energy they contain. In this way, biomass functions as a sort of natural battery for storing solar energy. As long as biomass is produced sustainably, with only as much used as is grown, the battery will last indefinitely.

In general there are two main approaches to using plants for energy production: growing plants specifically for energy use, and using the residues from plants that are used for other things. The best approaches vary from region to region according to climate, soils and geography.

Biofuel

Information on pump regarding ethanol fuel blend up to 10%, California.

Liquid biofuel is usually either bioalcohol such as bioethanol or an oil such as biodiesel.

Bioethanol is an alcohol made by fermenting the sugar components of plant materials and it is made mostly from sugar and starch crops. With advanced technology being developed, cellulosic biomass, such as trees and grasses, are also used as feedstocks for ethanol production. Ethanol can be used as a fuel for vehicles in its pure form, but it is usually used as a gasoline additive to increase octane and improve vehicle emissions. Bioethanol is widely used in the USA and in Brazil.

Biodiesel is made from vegetable oils, animal fats or recycled greases. Biodiesel can be used as a fuel for vehicles in its pure form, but it is usually used as a diesel additive to reduce levels of particulates, carbon monoxide, and hydrocarbons from diesel-powered vehicles. Biodiesel is produced from oils or fats using transesterification and is the most common biofuel in Europe.

Biofuels provided 1.8% of the world's transport fuel in 2008.

Geothermal energy

Main articles: Geothermal energy, Geothermal heat pump, and Renewable energy in Iceland

Krafla Geothermal Station in northeast Iceland

Geothermal energy is energy obtained by tapping the heat of the earth itself, both from kilometers deep into the Earth's crust in some places of the globe or from some meters in geothermal heat pump in all the places of the planet . It is expensive to build a power station but operating costs are low resulting in low energy costs for suitable sites. Ultimately, this energy derives from heat in the Earth's core.

Three types of power plants are used to generate power from geothermal energy: dry steam, flash, and binary. Dry steam plants take steam out of fractures in the ground and use it to directly drive a turbine that spins a generator. Flash plants take hot water, usually at temperatures over 200 °C, out of the ground, and allows it to boil as it rises to the surface then separates the steam phase in steam/water separators and then runs the steam through a turbine. In binary plants, the hot water flows through heat exchangers, boiling an organic fluid that spins the turbine. The condensed steam and remaining geothermal fluid from all three types of plants are injected back into the hot rock to pick up more heat.

The geothermal energy from the core of the Earth is closer to the surface in some areas than in others. Where hot underground steam or water can be tapped and brought to the surface it may be used to generate electricity. Such geothermal power sources exist in certain geologically unstable parts of the world such as Chile, Iceland, New Zealand, United States, the Philippines and Italy. The two most prominent areas for this in the United States are in the Yellowstone basin and in northern California. Iceland produced 170 MW geothermal power and heated 86% of all houses in the year 2000 through geothermal energy. Some 8000 MW of capacity is operational in total.

There is also the potential to generate geothermal energy from hot dry rocks. Holes at least 3 km deep are drilled into the earth. Some of these holes pump water into the earth, while other holes pump hot water out. The heat resource consists of hot underground radiogenic granite rocks, which heat up when there is enough sediment between the rock and the earths surface. Several companies in Australia are exploring this technology.

Renewable energy commercialization

Main article: Renewable energy commercialization

Growth of renewables

From the end of 2004 to the end of 2008, solar photovoltaic (PV) capacity increased sixfold to more than 16 gigawatts (GW), wind power capacity increased 250 percent to 121 GW, and total power capacity from new renewables increased 75 percent to 280 GW. During the same period, solar heating capacity doubled to 145 gigawatts-thermal (GWth), while biodiesel production increased sixfold to 12 billion liters per year and ethanol production doubled to 67 billion liters per year.

Selected renewable energy indicators

Selected global indicators	2006	2007	2008
Investment in new renewable capacity (annual)	63	104	120 billion USD
Existing renewables power capacity, including large-scale hydro	1,020	1,070	1,140 GWe
Existing renewables power capacity, excluding large hydro	207	240	280 GWe
Wind power capacity (existing)	74	94	121 GWe
Biomass heating			~250 GWth
Solar hot water/ Space heating			145 GWth
Geothermal heating			~50 GWth
Ethanol production (annual)	39	50	67 billion liters
Countries with policy targets for renewable energy use		66	73

Economics

Main article: Relative cost of electricity generated by different sources

Percentage of renewables in primary energy consumption of EU-member states in 2005. Source: Primärenergieverbrauch und erneuerbare Energien in der EU, Fig 55

When comparing renewable energy sources with each other and with conventional power sources, three main factors must be considered:

• capital costs (including, for nuclear energy, waste-disposal and decommissioning costs);
• operating and maintenance costs;
• fuel costs (for fossil-fuel and biomass sources—for wastes, these costs may actually be negative).

To evaluate the total cost of production of electricity, the streams of costs are converted to a net present value using the time value of money. Inherently, renewables are on a decreasing cost curve, while non-renewables are on an increasing cost curve. In 2009, costs are comparable among wind, nuclear, coal, and natural gas, but for CSP—concentrating solar power—and PV (photovoltaics) they are somewhat higher.

There are additional costs for renewables in terms of increased grid interconnection to allow for variability of weather and load, but these have been shown in the pan-European case to be quite low—overall, wind energy costs about the same as present-day power.

Wind power market

See also: List of onshore wind farms and List of offshore wind farms

Wind power: worldwide installed capacity 1996-2008

At the end of 2009, worldwide wind farm capacity was 157,900 MW, representing an increase of 31 percent during the year, and wind power supplied some 1.3% of global electricity consumption. Wind power accounts for approximately 19% of electricity use in Denmark, 9% in Spain and Portugal, and 6% in Germany and the Republic of Ireland. The United States is an important growth area and installed U.S. wind power capacity reached 25,170 MW at the end of 2008. As of September 2009, the Roscoe Wind Farm (781 MW) is the world's largest wind farm.

As of 2009, the 209 megawatt (MW) Horns Rev 2 wind farm in Denmark is the world's largest offshore wind farm. The United Kingdom is the world's leading generator of offshore wind power, followed by Denmark.

New generation of solar thermal plants

Solar Towers from left: PS10, PS20.

Main article: List of solar thermal power stations

See also: Solar power plants in the Mojave Desert

Large solar thermal power stations include the 354 MW Solar Energy Generating Systems power plant in the USA, Nevada Solar One (USA, 64 MW), Andasol 1 (Spain, 50 MW), Andasol 2 (Spain, 50 MW), PS20 solar power tower (Spain, 20 MW), and the PS10 solar power tower (Spain, 11 MW).

The solar thermal power industry is growing rapidly with 1.2 GW under construction as of April 2009 and another 13.9 GW announced globally through 2014. Spain is the epicenter of solar thermal power development with 22 projects for 1,037 MW under construction, all of which are projected to come online by the end of 2010. In the United States, 5,600 MW of solar thermal power projects have been announced. In developing countries, three World Bank projects for integrated solar thermal/combined-cycle gas-turbine power plants in Egypt, Mexico, and Morocco have been approved.

Photovoltaic market

Main article: List of photovoltaic power stations

40 MW PV Array installed in Waldpolenz, Germany

Photovoltaic production has been increasing by an average of some 20 percent each year since 2002, making it the world’s fastest-growing energy technology. At the end of 2009, the cumulative global PV installations surpassed 21,000 megawatts.

As of October 2009, the largest photovoltaic (PV) power plants in the world are the Olmedilla Photovoltaic Park (Spain, 60 MW), the Strasskirchen Solar Park (Germany, 54 MW), the Lieberose Photovoltaic Park (Germany, 53 MW), the Puertollano Photovoltaic Park (Spain, 50 MW), the Moura photovoltaic power station (Portugal, 46 MW), and the Waldpolenz Solar Park (Germany, 40 MW).

Many of these plants are integrated with agriculture and some use innovative tracking systems that follow the sun's daily path across the sky to generate more electricity than conventional fixed-mounted systems. There are no fuel costs or emissions during operation of the power stations.

Topaz Solar Farm is a proposed 550 MW solar photovoltaic power plant which is to be built northwest of California Valley in the USA at a cost of over $1 billion. High Plains Ranch is a proposed 250 MW solar photovoltaic power plant which is to be built on the Carrizo Plain, northwest of California Valley.

However, when it comes to renewable energy systems and PV, it is not just large systems that matter. Building-integrated photovoltaics or "onsite" PV systems have the advantage of being matched to end use energy needs in terms of scale. So the energy is supplied close to where it is needed.

Use of ethanol for transportation

File:Bunda do ônibus de etanol.jpg

E95 trial bus operating in São Paulo, Brazil.

See also: Ethanol fuel and BioEthanol for Sustainable Transport

Since the 1970s, Brazil has had an ethanol fuel program which has allowed the country to become the world's second largest producer of ethanol (after the United States) and the world's largest exporter. Brazil’s ethanol fuel program uses modern equipment and cheap sugar cane as feedstock, and the residual cane-waste (bagasse) is used to process heat and power. There are no longer light vehicles in Brazil running on pure gasoline. By the end of 2008 there were 35,000 filling stations throughout Brazil with at least one ethanol pump.

Most cars on the road today in the U.S. can run on blends of up to 10% ethanol, and motor vehicle manufacturers already produce vehicles designed to run on much higher ethanol blends. Ford, DaimlerChrysler, and GM are among the automobile companies that sell “flexible-fuel” cars, trucks, and minivans that can use gasoline and ethanol blends ranging from pure gasoline up to 85% ethanol (E85). By mid-2006, there were approximately six million E85-compatible vehicles on U.S. roads. The challenge is to expand the market for biofuels beyond the farm states where they have been most popular to date. Flex-fuel vehicles are assisting in this transition because they allow drivers to choose different fuels based on price and availability. The Energy Policy Act of 2005, which calls for 7.5 billion gallons of biofuels to be used annually by 2012, will also help to expand the market.

Geothermal energy prospects

The West Ford Flat power plant is one of 21 power plants at The Geysers.

See also: Geothermal energy in the United States

The Geysers, is a geothermal power field located 72 miles (116 km) north of San Francisco, California. It is the largest geothermal development in the world outputting over 750 MW.

Geothermal power capacity surpassed 10 GW in 2008. The United States is the world leader, with some 120 projects under development in early 2009, representing at least 5 GW. Other countries with significant recent growth in geothermal include Australia, El Salvador, Guatemala, Iceland, Indonesia, Kenya, Mexico, Nicaragua, Papua New Guinea, and Turkey. As of 2008, geothermal power development was under way in more than 40 countries. Geothermal power accounted for 17 percent of the Philippines total power mix at the end of 2008, with installed capacity close to 2,000 megawatts.

Geothermal (ground source) heat pumps represented an estimated 30 GWth of installed capacity at the end of 2008, with other direct uses of geothermal heat (i.e., for space heating, agricultural drying and other uses) reaching an estimated 15 GWth. As of 2008, at least 76 countries use direct geothermal energy in some form.

Wave farms expansion

One of 3 Pelamis Wave Energy Converters in the harbor of Peniche, Portugal

Main article: Wave farm

Portugal now has the world's first commercial wave farm, the Agucadoura Wave Park, officially opened in September 2008. The farm uses three Pelamis P-750 machines generating 2.25 MW. Initial costs are put at € 8.5 million. A second phase of the project is now planned to increase the installed capacity to 21MW using a further 25 Pelamis machines.

Funding for a wave farm in Scotland was announced in February, 2007 by the Scottish Government, at a cost of over 4 million pounds, as part of a UK£13 million funding packages for ocean power in Scotland. The farm will be the world's largest with a capacity of 3MW generated by four Pelamis machines.

Developing country markets

Main article: Renewable energy in developing countries

Renewable energy can be particularly suitable for developing countries. In rural and remote areas, transmission and distribution of energy generated from fossil fuels can be difficult and expensive. Producing renewable energy locally can offer a viable alternative.

Renewable energy projects in many developing countries have demonstrated that renewable energy can directly contribute to poverty alleviation by providing the energy needed for creating businesses and employment. Renewable energy technologies can also make indirect contributions to alleviating poverty by providing energy for cooking, space heating, and lighting. Renewable energy can also contribute to education, by providing electricity to schools.

Kenya is the world leader in the number of solar power systems installed per capita (but not the number of watts added). More than 30,000 very small solar panels, each producing 12 to 30 watts, are sold in Kenya annually. For an investment of as little as $100 for the panel and wiring, the PV system can be used to charge a car battery, which can then provide power to run a fluorescent lamp or a small television for a few hours a day. More Kenyans adopt solar power every year than make connections to the country’s electric grid.

In India, a solar loan program sponsored by UNEP has helped 100,000 people finance solar power systems in India. Success in India's solar program has led to similar projects in other parts of developing world like Tunisia, Morocco, Indonesia and Mexico.

Industry and policy trends

See also: Renewable energy industry and Renewable energy policy

Global renewable energy investment growth (1995-2007)

Global revenues for solar photovoltaics, wind power, and biofuels expanded from $76 billion in 2007 to $115 billion in 2008. New global investments in clean energy technologies expanded by 4.7 percent from $148 billion in 2007 to $155 billion in 2008. U.S. President Barack Obama's American Recovery and Reinvestment Act of 2009 includes more than $70 billion in direct spending and tax credits for clean energy and associated transportation programs. Clean Edge suggests that the commercialization of clean energy will help countries around the world pull out of the current economic malaise. Leading renewable energy companies include First Solar, Gamesa, GE Energy, Q-Cells, Sharp Solar, Siemens, SunOpta, Suntech, and Vestas.

The International Renewable Energy Agency (IRENA) is an intergovernmental organization for promoting the adoption of renewable energy worldwide. It aims to provide concrete policy advice and facilitate capacity building and technology transfer. IRENA, a project promoted by EUROSOLAR since 1990, was formed on January 26, 2009, by 75 countries signing the charter of IRENA. As of March 2010, IRENA has 143 member states who all are considered as founding members, of which 14 have also ratified the statute.

Renewable energy policy targets exist in some 73 countries around the world, and public policies to promote renewable energy use have become more common in recent years. At least 64 countries have some type of policy to promote renewable power generation. Mandates for solar hot water in new construction are becoming more common at both national and local levels. Mandates for blending biofuels into vehicle fuels have been enacted in 17 countries.

New and emerging renewable energy technologies

New and emerging renewable energy technologies are still under development and include cellulosic ethanol, hot-dry-rock geothermal power, and ocean energy. These technologies are not yet widely demonstrated or have limited commercialization. Many are on the horizon and may have potential comparable to other renewable energy technologies, but still depend on attracting sufficient attention and RD&D funding.

Cellulosic ethanol

See also: Cellulosic ethanol commercialization

Companies such as Iogen, Broin, and Abengoa are building refineries that can process biomass and turn it into ethanol, while companies such as Diversa, Novozymes, and Dyadic are producing enzymes which could enable a cellulosic ethanol future. The shift from food crop feedstocks to waste residues and native grasses offers significant opportunities for a range of players, from farmers to biotechnology firms, and from project developers to investors.

Selected Commercial Cellulosic Ethanol Plants in the U.S.
(Operational or under construction)

Company	Location	Feedstock
Abengoa Bioenergy	Hugoton, KS	Wheat straw
BlueFire Ethanol	Irvine, CA	Multiple sources
Gulf Coast Energy	Mossy Head, FL	Wood waste
Mascoma	Lansing, MI	Wood
POET LLC	Emmetsburg, IA	Corn cobs
Range Fuels	Treutlen County, GA	Wood waste
SunOpta	Little Falls, MN	Wood chips
Xethanol	Auburndale, FL	Citrus peels

Ocean energy

Systems to harvest utility-scale electrical power from ocean waves have recently been gaining momentum as a viable technology. The potential for this technology is considered promising, especially on west-facing coasts with latitudes between 40 and 60 degrees:

In the United Kingdom, for example, the Carbon Trust recently estimated the extent of the economically viable offshore resource at 55 TWh per year, about 14% of current national demand. Across Europe, the technologically achievable resource has been estimated to be at least 280 TWh per year. In 2003, the U.S. Electric Power Research Institute (EPRI) estimated the viable resource in the United States at 255 TWh per year (6% of demand).

The world's first commercial tidal power station was installed in 2007 in the narrows of Strangford Lough in Ireland. The 1.2 megawatt underwater tidal electricity generator, part of Northern Ireland's Environment & Renewable Energy Fund scheme, takes advantage of the fast tidal flow (up to 4 metres per second) in the lough. Although the generator is powerful enough to power a thousand homes, the turbine has minimal environmental impact, as it is almost entirely submerged, and the rotors pose no danger to wildlife as they turn quite slowly.

Enhanced Geothermal Systems

Main article: Enhanced Geothermal Systems

Enhanced geothermal system 1:Reservoir 2:Pump house 3:Heat exchanger 4:Turbine hall 5:Production well 6:Injection well 7:Hot water to district heating 8:Porous sediments 9:Observation well 10:Crystalline bedrock

Enhanced Geothermal Systems are a new type of geothermal power technologies that do not require natural convective hydrothermal resources. The vast majority of geothermal energy within drilling reach is in dry and non-porous rock. EGS technologies "enhance" and/or create geothermal resources in this "hot dry rock (HDR)" through hydraulic stimulation.

EGS / HDR technologies, like hydrothermal geothermal, are expected to be baseload resources which produce power 24 hours a day like a fossil plant. Distinct from hydrothermal, HDR / EGS may be feasible anywhere in the world, depending on the economic limits of drill depth. Good locations are over deep granite covered by a thick (3–5 km) layer of insulating sediments which slow heat loss. HDR wells are expected to have a useful life of 20 to 30 years before the outflow temperature drops about 10 degrees Celsius and the well becomes uneconomic. If left for 50 to 300 years the temperature will recover.

There are HDR and EGS systems currently being developed and tested in France, Australia, Japan, Germany, the U.S. and Switzerland. The largest EGS project in the world is a 25 megawatt demonstration plant currently being developed in the Cooper Basin, Australia. The Cooper Basin has the potential to generate 5,000–10,000 MW.

Nanotechnology thin-film solar panels

Solar power panels that use nanotechnology, which can create circuits out of individual silicon molecules, may cost half as much as traditional photovoltaic cells, according to executives and investors involved in developing the products. Nanosolar has secured more than $100 million from investors to build a factory for nanotechnology thin-film solar panels.

Ocean thermal energy conversion

Main article: Ocean thermal energy conversion

Ocean thermal energy conversion (OTEC) uses the temperature difference that exists between deep and shallow waters to run a heat engine.

Osmotic power

Main article: Osmotic power

Osmotic power (or salinity gradient power) is the energy retrieved from the difference in the salt concentration between seawater and river water. Two practical methods for this are reverse electrodialysis (RED) and pressure retarded osmosis. (PRO).

Microbial fuel cells

Main article: Microbial fuel cell

A microbial fuel cell is a bio-electrochemical system that drives a current by mimicking bacterial interactions found in nature - converting chemical energy to electrical energy by the catalytic reaction of microorganisms.

Renewable energy debate

Main article: Renewable energy debate

Renewable electricity production, from sources such as wind power and solar power, is sometimes criticized for being variable or intermittent. However, the International Energy Agency has stated that deployment of renewable technologies usually increases the diversity of electricity sources and, through local generation, contributes to the flexibility of the system and its resistance to central shocks.

There have been "not in my back yard" (NIMBY) concerns relating to the visual and other impacts of some wind farms, with local residents sometimes fighting or blocking construction. In the USA, the Massachusetts Cape Wind project was delayed for years partly because of aesthetic concerns. However, residents in other areas have been more positive and there are many examples of community wind farm developments. According to a town councilor, the overwhelming majority of locals believe that the Ardrossan Wind Farm in Scotland has enhanced the area.

The market for renewable energy technologies has continued to grow. Climate change concerns, coupled with high oil prices, peak oil, and increasing government support, are driving increasing renewable energy legislation, incentives and commercialization. New government spending, regulation and policies helped the industry weather the 2009 economic crisis better than many other sectors.

See also

Lists

• List of renewable energy organizations
• List of renewable energy technologies
• List of renewable energy topics by country
• List of countries by electricity production from renewable sources

Articles

• Biomass Fuelled Power Plants
• Building-integrated photovoltaics
• Electrical energy efficiency on United States farms
• Energy security and renewable technology
• High altitude wind power
• Hybrid renewable energy system
• International Renewable Energy Agency (IRENA)
• International Renewable Energy Alliance (REN Alliance)
• Low carbon technology
• Nuclear power proposed as renewable energy
• Relative cost of electricity generated by different sources
• Renewable energy credit
• Renewable energy debate
• Renewable energy development
• Renewable energy economy
• Renewable energy in Africa
• Renewable heat
• Soft energy technologies
• Sustainable energy