Deckle edge

From Wikipedia, the free encyclopedia
Deckle edge

Paper with a feathered edge is described as having a deckle edge, in contrast to a cut edge. Before the 19th century, the deckle edge was unavoidable, a natural artifact of the papermaking process in which sheets of paper were made individually on a deckle, a wooden frame.[1] Today, machine-made paper may artificially have its edges produced with deckle edges.[2]: 456, 458 

The deckle could not make a perfect seal against the screen at the edges and the paper slurry would seep under, creating a rough edge to the paper. The deckle edge could be trimmed off, but this extra step added to the cost of the book. Beginning in the early 1800s with the invention of the Fourdrinier machine, paper was produced in long rolls and the deckle became mostly obsolete. Although there was some rough edging on the ends of the rolls, it was cut off, and the individual sheets cut out from the roll would have no deckle edge in any case.[1]

History[edit]

With the appearance of smooth edges in the 19th century, the deckle edge slowly emerged as a status symbol. Many 19th-century presses advertised two versions of the same book: one with edges trimmed smooth, the other a higher-priced deckle version. This suggested the deckle book was made with higher-quality paper, or with more expensive methods. This tradition carried forward into the 20th and 21st centuries. Modern deckle edges are produced by a purpose-built machine to give the appearance of a true deckle edge by cutting a smooth edge into patterns. Ironically, the apparent value of a deckle edge is, in part, the impression that it is handmade, an inherently greater expense than mass-production.[citation needed]

Criticism[edit]

Many readers consider the deckle edge to be inferior, given the awkwardness of turning the pages of deckle-edge books, while others are entirely unfamiliar with it and assume it to be an accidental defect. For example, Amazon has left notes to book buyers clarifying that the deckle is not an unintentional flaw in the product.[1] A deckle edge is unrelated to the practice of unopened pages, in which a reader must cut open pages with a knife.[1]

Many fine art works or digital prints also have deckle edges. Again, as in book printing, this was once considered an imperfection as the by-product of handmade papermaking. Now makers use it to create the appearance of greater value, handmade products costing more than those mass-produced.[citation needed]

References[edit]

  1. ^ a b c d G.F. (Jul 15, 2012). "Deckle detecting". The Economist. Retrieved July 17, 2012.
  2. ^ Hunter, Dard (1978) [1947]. Papermaking, the History and Technique of an Ancient Craft. New York: Dover Publications. ISBN 0-486-23619-6.