Aggressive Link Power Management
 | This article needs additional citations for verification. (March 2013) |
Aggressive Link Power Management (ALPM) is a power management protocol for Advanced Host Controller Interface-compliant (AHCI) Serial ATA (SATA) devices, such as hard disk drives and solid-state drives.[1]
Description[edit]
When enabled via the AHCI controller, this allows the SATA host bus adapter to enter a low-power state during periods of inactivity, thus saving energy. The drawback to this is increased periodic latency as the drive must be re-activated and brought back on-line before it can be used, and this will often appear as a delay to the end-user.
States[edit]
There are three states:[2]
- Active
- Low Power with two internal states Partial and Slumber. Partial has a maximum return latency of 10 microseconds while slumber has a maximum latency of 10 milliseconds. The states can be initiated by Host (HIPM), Device (DIPM) or both. Hot swapping is disabled.
- Device Sleep with a maximum return latency of 20 milliseconds unless otherwise specified in Identify Data Log
These can be selected by the SATA AHCI driver, usually via a configuration option, or by the OS Power Options. Windows Vista and later allows the tweaking of AHCI LPM modes through a registry hack.[3] Hot swapping is disabled.
See also[edit]
References[edit]
- ^ "Serial ATA AHCI: Specification, Rev. 1.3". Intel. Retrieved 31 October 2012.
- ^ "Designing Energy Efficient SATA Devices" (PDF). Intel. Retrieved 31 October 2012.
- ^ "Add AHCI Link Power Management to Power Options in Windows". Retrieved 4 January 2023.
External links[edit]
 | This computer hardware article is a stub. You can help Wikipedia by expanding it. |