User:Noah Van Horne/Magnetic Skyrmion

In physics, magnetic skyrmions (occasionally described as 'vortices,' or 'vortex-like' configurations) are quasiparticles which have been predicted theoretically and observed experimentally in condensed matter systems. They have been reportedly observed under both low-temperature and ambient-temperature conditions. Magnetic skyrmions can form in so-called 'bulk' materials such as MnSi, or in magnetic thin films. They are chiral by nature, and may exist both as dynamic excitations or stable or metastable states. Although the broad lines defining magnetic skyrmions have been established defacto, there exist a variety of interpretations with subtle differences.

Most descriptions include the notion of topology-a categorization of shapes and the way in which an object is laid out in space-using a continuous-field approximation as defined in micromagnetics. Descriptions generally specify a non-zero, integer value of the topological index, (not to be confused with the chemistry meaning of 'topological index'). This value is sometimes also referred to as the winding number, [Needs Citation] the topological charge (although it is unrelated to 'charge' in the electrical sense), the topological quantum number (although it is unrelated to quantum mechanics or quantum mechanical phenomena, notwithstanding the quantization of the index values), or more loosely as the “skyrmion number.” The topological index of the field can be described mathematically as

$\mathbf {n} ={\tfrac {1}{4\pi }}\int \mathbf {M} \cdot \left({\frac {\partial \mathbf {M} }{\partial x}}\times {\frac {\partial \mathbf {M} }{\partial y}}\right)dxdy$ (1)

where $\mathbf {n}$ is the topological index, $\mathbf {M}$ is the unit vector in the direction of the local magnetization within the magnetic thin, ultra-thin or bulk film, and the integral is taken over a two dimensional space. (A generalization to a three-dimensional space is possible).[Needs Citation] What this equation describes physically is a configuration in which the spins in a magnetic film are all aligned perpendicularly to the plane of the film, with the exception of those in one, specific region, where the spins progressively turn over to an orientation that is perpendicular to the plane of the film but anti-parallel to those in the rest of the plane. Assuming 2D isotropy, the free energy of such a configuration is minimized by relaxation towards a state exhibiting circular symmetry, resulting in the configuration illustrated schematically (for a 2 dimensional skyrmion) in figure 1. (J. Sampaio et al, 2013) In one dimension, the distinction between the progression of magnetization in a 'skyrmionic' domain wall, and the progression of magnetization in a topologically trivial magnetic domain wall, is illustrated in figure 2. (Courtesy of Sören Boyn) Considering this one dimensional case is equivalent to considering a horizontal cut across the diameter of a 2-dimensional hedgehog skyrmion (fig. 1) and looking at the progression of the local spin orientations.

It is worth observing that there are two different configurations which satisfy the topological index criterion stated above. The distinction between these can be made clear by considering a horizontal cut across both of the skyrmions illustrated in figure 1, and looking at the progression of the local spin orientations. In one case the progression of magnetization across the diameter is helical. This type of skyrmion is often called a 'vortex skyrmion.' In the other case, the progression of magnetization is cycloidal, giving rise to what is known as a 'hedgehog skyrmion.'

Explanation of Stability

The skyrmion magnetic configuration is predicted to be stable because the atomic spins which are oriented opposite those of the surrounding thin-film cannot ‘flip around’ to align themselves with the rest of the atoms in the film, without overcoming an energy barrier. This energy barrier is often ambiguously described as arising from ‘topological protection.’ (See Topological Stability vs. Energy Stability).

Depending on the magnetic interactions existing in a given system, the skyrmion topology can be a stable, meta-stable, or unstable solution when one minimizes the system's free energy. [Needs Citation] Theoretical solutions exist for both isolated skyrmions and skyrmion lattices. [Needs Citation] However, since the stability and behavioral attributes of skyrmions can vary significantly based on the type of interactions in a system, the word 'skyrmion' can refer to substantially different magnetic objects. For this reason, some physicists choose to reserve use of the term 'skyrmion' to describe magnetic objects with a specific set of stability properties, and arising from a specific set of magnetic interactions.

Multiple Definitions of Magnetic Skyrmions

In general, definitions of magnetic skyrmions fall into 2 categories. Which category one chooses to refer to depends largely on the emphasis one wishes to place on different qualities. A first category is based strictly on topology. This definition may seem appropriate when considering topology-dependent properties of magnetic objects, such as their dynamical behavior. A second category emphasizes the intrinsic energy stability of certain solitonic magnetic objects. In this case, the energy stability is often (but not necessarily) associated with a form of chiral interaction known as the Dzyaloshinskii-Moriya Interaction, or 'DMI.'

1. When expressed mathematically, definitions in the first category state that magnetic spin-textures with a spin-progression satisfying the condition:${\tfrac {1}{4\pi }}\int \mathbf {M} \cdot \left({\frac {\partial \mathbf {M} }{\partial x}}\times {\frac {\partial \mathbf {M} }{\partial y}}\right)dxdy=\mathbf {n}$ where ‖n‖ is an integer ≥1, can be qualified as magnetic skyrmions.
2. Definitions in the second category similarly stipulate that a magnetic skyrmion exhibits a spin-texture with a spin-progression satisfying the condition:${\tfrac {1}{4\pi }}\int \mathbf {M} \cdot \left({\frac {\partial \mathbf {M} }{\partial x}}\times {\frac {\partial \mathbf {M} }{\partial y}}\right)dxdy=\mathbf {n}$

where ‖n‖ is an integer ≥1, but further suggest that there must exist an energy term that stabilizes the spin-structure into a localized magnetic soliton whose energy is invariant by translation of the soliton's position in space. (The spatial energy invariance condition constitutes a way to rule out structures stabilized by locally-acting factors external to the system, such as confinement arising from the geometry of a specific nanostructure).[needs citation]

The first set of definitions for magnetic skyrmions is a superset of the second, in that it places less stringent requirements on the properties of a magnetic spin texture. This definition finds a raison d'être because topology itself determines some properties of magnetic spin textures, such as their dynamical responses to excitations.

The second category of definitions may be preferred to underscore intrinsic stability qualities of some ‖n‖≥1 magnetic configurations. These qualities arise from stabilizing interactions which may be described in several mathematical ways, including for example by using higher-order spatial derivative terms such as 2nd or 4th order terms to describe a field, (the mechanism originally proposed in particle physics by Tony Skyrme for a continuous field model), [Citation 17 Needs Edit] or 1st order derivative functionals known as Lifshitz invariants --energy contributions linear in first spatial derivatives of the magnetization—as later proposed by Alexei Bogdanov. (An example of such a 1st order functional is the Dzyaloshinskii-Moriya Interaction1). In all cases the energy term acts to introduce topologically non-trivial solutions to a system of partial differential equations. [Needs Citation] In other words, the energy term acts to render possible the existence of a topologically non-trivial magnetic configuration that is confined to a finite, localized region, and possesses an intrinsic stability or meta-stability relative to a trivial homogeneously magnetized ground-state — i.e. a magnetic soliton. An example hamiltonian containing one set of energy terms that allows for the existence of skyrmions of the second category is the following:

$H=-J\sum _{\mathbf {r} }\mathbf {M_{r}} \cdot \left(\mathbf {M_{r+e_{x}}} +\mathbf {M_{r+e_{y}}} \right)-D\sum _{\mathbf {r} }\left(\mathbf {M_{r}} \times \mathbf {M_{r+e_{x}}} \cdot \mathbf {e_{x}} +\mathbf {M_{r}} \times \mathbf {M_{r+e_{y}}} \cdot \mathbf {e_{y}} \right)-\mathbf {B} \cdot \sum _{\mathbf {r} }\mathbf {M_{r}} -A\sum _{\mathbf {rI} }M_{z\mathbf {r} }^{2}$ (2)

where the first, second, third and fourth sums correspond to the exchange, Dzyaloshinskii-Moriya, Zeeman (responsible for the "usual" torques and forces observed on a magnetic dipole moment in a magnetic field), and magnetic Anisotropy (typically magnetocrystalline anisotropy) interaction energies respectively. (Note that the dipolar, or 'demagnetizing' interaction between atoms is sometimes omitted in simulations of ultra-thin magnetic films, because it tends to contribute a minor effect in comparison with the others. [Needs Citation] It has been omitted in the above hamiltonian.)

Topological Stability vs. Energetic Stability

A non-trivial topology does not in itself imply energetic stability. There is in fact no necessary relation between topology and energetic stability. Hence, one must be cautious not to confuse ‘topological stability,’ which is a mathematical concept, [Needs Citation] with energy stability in real physical systems. Topological stability refers to the idea that in order for a system described by a continuous field to transition from one topological state to another, a rupture must occur in the continuous field, i.e. a discontinuity must be produced. For example, if one wishes to transform a flexible balloon doughnut (torus) into an ordinary spherical balloon, it is necessary to introduce a rupture on some part of the balloon doughnut's surface. Mathematically, the balloon doughnut would be described as 'topologically stable.' However, in physics, the free energy required to introduce a rupture enabling the transition of a system from one ‘topological’ state to another is always finite. For example, it is possible to turn a rubber ballon into flat piece of rubber by poking it with a needle (and popping it!). Thus, although a physical system may be approximately described using the mathematical concept of topology, attributes such as energetic stability are dependent on the system's parameters--the strength of the rubber in the example above--not the topology per se. Therefore what is often referred to as ‘topological protection,’ or a 'topological barrier' should more accurately be referred to as a 'topology-related energy barrier,' although this terminology is somewhat cumbersome.

Unfortunately, even this phraseology is not ideal, as it can be misleading to apply the very notion of topology—a description which only rigorously applies to continuous fields— to infer the energetic stability of structures existing in discontinuous systems. Giving way to this temptation is sometimes problematic in physics, where fields which are approximated as continuous become discontinuous below certain size-scales. Such is the case for example when the concept of topology is associated with the micromagnetic model—which assimilates the magnetic texture of a system to a continuous field—and then applied indiscriminately without consideration of the model's physical limitations (i.e. that it ceases to be valid at atomic dimensions). In practice, treating the spin textures of magnetic materials as vectors of a continuous field model may result in inaccuracies due to the discretization of the atomic lattice at size-scales on the order of 0.1-1nm. Thus, in order to draw a meaningful parallel between the concept of topological stability and the energy stability of a system, the analogy must necessarily be accompanied by the introduction of a non-zero phenomenological ‘field rigidity’ to account for the finite energy needed to rupture the field’s topology. Modeling and then integrating this field rigidity can be likened to calculating a breakdown energy-density of the field.

The important distinction to bear in mind is therefore that magnetic ‖n‖=1 structures are in fact not stabilized by virtue of their ‘topology,’ but rather by the field rigidity parameters that characterize a given system. This is not to say that topology plays an insignificant role with regards to energetic stability. On the contrary, topology creates the possibility for stable magnetic states to exist, which is essential. However, topology in itself does not guarantee the stability of a state. In order for a state to have stability associated with its topology, it must be further accompanied by a non-zero field rigidity. Thus, topology may be considered a necessary but insufficient condition for the existence of certain classes of stable objects. While this distinction may at first seem pedantic, its physical motivation becomes apparent when considering two magnetic spin configurations of identical topology ‖n‖=1, but subject to the influences of only one differing magnetic interaction. For example, we may consider one spin configuration with, and one configuration without the presence of the DM interaction. In this case, the ‖n‖=1 configuration that is influenced by the DMI will be significantly more energetically stable than the ‖n‖=1 configuration without it, in spite of the identical topologies. This is because it is the field rigidity, not the topology, that confers the notable energy barrier which protects the topological state. Hence, using the terms 'topological protection' or 'topological stability' interchangeably with energy stability is misleading, and is liable to lead to fundamental confusion.

In the case of a system of magnetic atoms interacting via the exchange mechanism, if one were to assimilate the magnetic texture of the system to a continuous field, the energy required to introduce a topological rupture in a ‖n‖=1 configuration would correspond to the energy needed to flip the magnetic orientation of a small group of atoms (down to the limit of one atom). In the limit of introducing a single-atom magnetic defect, this would be the energy needed to overcome the exchange between one atom and its nearest neighbors, e.g. for a simple cubic lattice $E_{tot}=6\left(2J_{ab}\mathbf {S_{a}} \cdot \mathbf {S_{b}} \right)$ ∝ $6J_{ab}$. Here, $J_{ab}$ and the exchange interaction play the role of the integrated phenomenological ‘field rigidity’ described above.

From the Magnetic skyrmion 'Official' wikipedia page: In the case of a system of magnetic atoms interacting via the exchange mechanism, if one were to assimilate the magnetic texture of the system to a continuous field, the energy required to introduce a topological rupture in a ‖n‖=1 configuration would correspond to the energy needed to flip the magnetic orientation of a small group of atoms (down to the limit of one atom). In the limit of introducing a single-atom magnetic defect, or 'rupture' into the field, this would be the energy needed to overcome the exchange interaction between one atom and its nearest neighbors, e.g. for a simple cubic lattice $E_{tot}=6\left(2J_{ab}\mathbf {S_{a}} \cdot \mathbf {S_{b}} \right)$ ∝ $6J_{ab}$. Here, $J_{ab}$ and the exchange interaction play the role of the integrated phenomenological ‘field rigidity’ described above.

Practical Applications

The topology of magnetic skyrmions is anticipated to allow for the existence of discrete magnetic states which are significantly more energetically stable (per unit volume) than their single-domain counterparts. For this reason, it is envsioned that magnetic skyrmions may be used as bits to store information in future memory devices, where the state of the bit is encoded by the existence or non-existence of the magnetic skyrmion. Simulations also indicate that the position of magnetic skyrmions within a film may be manipulated using spin-currents. Thus, magnetic skyrmions also provide promising candidates for future racetrack type computing technologies.

References

[Needs Citation]

Some of these differences may result in ambiguity and associated misconceptions.