User:AJclarifies/Protein quaternary structure

Plans for what to change:

• Better description of what protein quaternary structure is.
• Explain why it is important/relevant.
• How we study it.
• Implications that it might have.
• Add a link to oligomers page.
• Also mention how quaternary structure is important for cell signaling.

Paragraphs below that are both bold and italicized contain text that I have added or revised.

Article Draft

Protein quaternary structure is the fourth (and highest) classification level of protein structure. Protein quaternary structure refers to the structure of proteins which are themselves composed of two or more smaller protein chains (also referred to as subunits). Protein quaternary structure describes the number and arrangement of multiple folded protein subunits in a multi-subunit complex. It includes organizations from simple dimers to large homooligomers and complexes with defined or variable numbers of subunits. In contrast to the first three levels of protein structure, not all proteins will have a quaternary structure since some proteins function as single units. Protein quaternary structure can also refer to biomolecular complexes of proteins with nucleic acids and other cofactors.

Description and examples

Many proteins are actually assemblies of multiple polypeptide chains. The quaternary structure refers to the number and arrangement of the protein subunits with respect to one another. Examples of proteins with quaternary structure include hemoglobin, DNA polymerase, ribosomes, antibodies, and ion channels.

Enzymes composed of subunits with diverse functions are sometimes called holoenzymes, in which some parts may be known as regulatory subunits and the functional core is known as the catalytic subunit. Other assemblies referred to instead as multiprotein complexes also possess quaternary structure. Examples include nucleosomes and microtubules. Changes in quaternary structure can occur through conformational changes within individual subunits or through reorientation of the subunits relative to each other. It is through such changes, which underlie cooperativity and allostery in "multimeric" enzymes, that many proteins undergo regulation and perform their physiological function.

The above definition follows a classical approach to biochemistry, established at times when the distinction between a protein and a functional, proteinaceous unit was difficult to elucidate. More recently, people refer to protein–protein interaction when discussing quaternary structure of proteins and consider all assemblies of proteins as protein complexes.

Nomenclature

The number of subunits in an oligomeric complex is described using names that end in -mer (Greek for "part, subunit"). Formal and Greco-Latinate names are generally used for the first ten types and can be used for up to twenty subunits, whereas higher order complexes are usually described by the number of subunits, followed by -meric.

1 = monomer/subunit 2 = dimer 3 = trimer 4 = tetramer 5 = pentamer 6 = hexamer

7 = heptamer 8 = octamer 9 = nonamer 10 = decamer 11 = undecamer 12 = dodecamer

13 = tridecamer 14 = tetradecamer 15 = pentadecamer* 16 = hexadecamer 17 = heptadecamer* 18 = octadecamer

19 = nonadecamer 20 = eicosamer 21 = 21-mer 22 = 22-mer 23 = 23-mer* etc.

*No known examples

Although complexes higher than octamers are rarely observed for most proteins, there are some important exceptions. Viral capsids are often composed of multiples of 60 proteins. Several molecular machines are also found in the cell, such as the proteasome (four heptameric rings = 28 subunits), the transcription complex and the spliceosome. The ribosome is probably the largest molecular machine, and is composed of many RNA and protein molecules.

In some cases, proteins form complexes that then assemble into even larger complexes. In such cases, one uses the nomenclature, e.g., "dimer of dimers" or "trimer of dimers", to suggest that the complex might dissociate into smaller sub-complexes before dissociating into monomers.

Another distinction often made when referring to oligomers is whether they are homomeric or heteromeric, referring to whether the smaller protein subunits that come together to make the protein complex are the same (homomeric) or different (heteromeric) from each other. For example, two identical protein monomers would come together to form a homo-dimer, whereas two different protein monomers would create a hetero-dimer.

Structure Determination

Protein quaternary structure can be determined using a variety of experimental techniques that require a sample of protein in a variety of experimental conditions. The experiments often provide an estimate of the mass of the native protein and, together with knowledge of the masses and/or stoichiometry of the subunits, allow the quaternary structure to be predicted with a given accuracy. It is not always possible to obtain a precise determination of the subunit composition for a variety of reasons.

The number of subunits in a protein complex can often be determined by measuring the hydrodynamic molecular volume or mass of the intact complex, which requires native solution conditions. For folded proteins, the mass can be inferred from its volume using the partial specific volume of 0.73 ml/g. However, volume measurements are less certain than mass measurements, since unfolded proteins appear to have a much larger volume than folded proteins; additional experiments are required to determine whether a protein is unfolded or has formed an oligomer.

Direct mass measurement of intact complexes

• sedimentation-equilibrium analytical ultracentrifugation
• electrospray mass spectrometry
• Mass Spectrometric Immunoassay MSIA

Direct size measurement of intact complexes

• static light scattering
• size exclusion chromatography (requires calibration)
• Dual polarisation interferometry

Indirect size measurement of intact complexes

• sedimentation-velocity analytical ultracentrifugation (measures the translational diffusion constant)
• dynamic light scattering (measures the translational diffusion constant)
• pulsed-gradient protein nuclear magnetic resonance (measures the translational diffusion constant)
• fluorescence polarization (measures the rotational diffusion constant)
• dielectric relaxation (measures the rotational diffusion constant)
• Dual polarisation interferometry (measures the size and the density of the complex)

Methods that measure the mass or volume under unfolding conditions (such as MALDI-TOF mass spectrometry and SDS-PAGE) are generally not useful, since non-native conditions usually cause the complex to dissociate into monomers. However, these may sometimes be applicable; for example, the experimenter may apply SDS-PAGE after first treating the intact complex with chemical cross-link reagents.

Prediction

Some bioinformatics methods have been developed for predicting the quaternary structural attributes of proteins based on their sequence information by using various modes of pseudo amino acid composition.

Protein folding prediction programs, such as AlphaFold, that are used to predict protein tertiary structure have also been expanding to better predict protein quaternary structure.

Role in Cell Signaling

Protein quaternary structure also plays an important role in certain cell signaling pathways. The G-protein coupled receptor pathway involves a heterotrimeric protein known as a G-protein. G-proteins contain three distinct subunits known as the G-alpha, G-beta, and G-gamma subunits. When the G-protein is activated, it binds to the G-protein coupled receptor protein and the cell signaling pathway is initiated. Another example is the receptor tyrosine kinase (RTK) pathway, which is initiated by the dimerization of two receptor tyrosine kinase monomers. When the dimer is formed, the two kinases can phosphorylate each other and initiate a cell signaling pathway.

Protein–protein interactions

Main article: Protein–protein interaction

Proteins are capable of forming very tight complexes. For example, ribonuclease inhibitor binds to ribonuclease A with a roughly 20 fM dissociation constant. Other proteins have evolved to bind specifically to unusual moieties on another protein, e.g., biotin groups (avidin), phosphorylated tyrosines (SH2 domains) or proline-rich segments (SH3 domains). Protein-protein interactions can be engineered to favor certain oligomerization states.

Intragenic complementation

When multiple copies of a polypeptide encoded by a gene form a quaternary complex, this protein structure is referred to as a multimer. When a multimer is formed from polypeptides produced by two different mutant alleles of a particular gene, the mixed multimer may exhibit greater functional activity than the unmixed multimers formed by each of the mutants alone. In such a case, the phenomenon is referred to as intragenic complementation (also called inter-allelic complementation). Intragenic complementation appears to be common and has been studied in many different genes in a variety of organisms including the fungi Neurospora crassa, Saccharomyces cerevisiae and Schizosaccharomyces pombe; the bacterium Salmonella typhimurium; the virus bacteriophage T4, an RNA virus, and humans. The intermolecular forces likely responsible for self-recognition and multimer formation were discussed by Jehle.

Assembly

Direct interaction of two nascent proteins emerging from nearby ribosomes appears to be a general mechanism for oligomer formation. Hundreds of protein oligomers were identified that assemble in human cells by such an interaction. The most prevalent form of interaction was between the N-terminal regions of the interacting proteins. Dimer formation appears to be able to occur independently of dedicated assembly machines.

See also

• Structural biology
• Nucleic acid quaternary structure
• Multiprotein complex
• Biomolecular complex
• Oligomers