PVC Bendit: Difference between revisions
Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0 |
m Normalize {{Multiple issues}}: Remove {{Multiple issues}} for only 1 maintenance template(s): Lead too long |
||
| Line 1: | Line 1: | ||
{{Multiple issues| |
|||
{{Orphan|date=July 2014}} |
{{Orphan|date=July 2014}} |
||
{{lead too long|date=May 2018}} |
{{lead too long|date=May 2018}} |
||
}} |
|||
'''PVC Bendit''' is a tool that uses heat to soften [[PVC]] pipe from the inside. It consists of an electrical resistance [[heating element]] jacketed in a metal hose with a power supply cable. It is primarily used to bend PVC pipe, though it can also be used to bend other [[thermoplastic]] tubes and sheets. It works by bringing up the temperature of the pipe or sheet to the softening point of 176 degrees or higher.<ref>{{cite web|title=Plastic Properties of Polyvinylchloride (PVC)|url=http://www.dynalabcorp.com/technical_info_pvc.asp|work=dynalabcorp.com|publisher=Dynalab corp|accessdate=26 March 2014|archive-url=https://web.archive.org/web/20140329150628/http://www.dynalabcorp.com/technical_info_pvc.asp|archive-date=29 March 2014|url-status=dead}}</ref><ref>{{cite web|title=Heat Distortion Temperature (softening temperature)|url=http://www.pvc.org/en/p/heat-distortion-temperature-softening-temperature|work=pvc.org|accessdate=26 March 2014}}</ref> Naturally, the longer the pipe is on the bender, the hotter and softer it will get. Once the pipe is softened, it can be formed into different shapes within the limitations of the material. When cooled, the pipe will retain all of the properties of the original material, but it will have additional stress on the points of the pipe that are stretched or compressed in the bending process.<ref>{{cite web |url=http://hidrocilsp.com.br/blog/bend-pvc-pipe.html |title=Archived copy |accessdate=2014-08-20 |url-status=dead |archiveurl=https://web.archive.org/web/20140821051138/http://hidrocilsp.com.br/blog/bend-pvc-pipe.html |archivedate=2014-08-21 }}</ref><ref>[https://www.miraclemethod.com/kansas-city-se Refinishing over Replacement]</ref> |
'''PVC Bendit''' is a tool that uses heat to soften [[PVC]] pipe from the inside. It consists of an electrical resistance [[heating element]] jacketed in a metal hose with a power supply cable. It is primarily used to bend PVC pipe, though it can also be used to bend other [[thermoplastic]] tubes and sheets. It works by bringing up the temperature of the pipe or sheet to the softening point of 176 degrees or higher.<ref>{{cite web|title=Plastic Properties of Polyvinylchloride (PVC)|url=http://www.dynalabcorp.com/technical_info_pvc.asp|work=dynalabcorp.com|publisher=Dynalab corp|accessdate=26 March 2014|archive-url=https://web.archive.org/web/20140329150628/http://www.dynalabcorp.com/technical_info_pvc.asp|archive-date=29 March 2014|url-status=dead}}</ref><ref>{{cite web|title=Heat Distortion Temperature (softening temperature)|url=http://www.pvc.org/en/p/heat-distortion-temperature-softening-temperature|work=pvc.org|accessdate=26 March 2014}}</ref> Naturally, the longer the pipe is on the bender, the hotter and softer it will get. Once the pipe is softened, it can be formed into different shapes within the limitations of the material. When cooled, the pipe will retain all of the properties of the original material, but it will have additional stress on the points of the pipe that are stretched or compressed in the bending process.<ref>{{cite web |url=http://hidrocilsp.com.br/blog/bend-pvc-pipe.html |title=Archived copy |accessdate=2014-08-20 |url-status=dead |archiveurl=https://web.archive.org/web/20140821051138/http://hidrocilsp.com.br/blog/bend-pvc-pipe.html |archivedate=2014-08-21 }}</ref><ref>[https://www.miraclemethod.com/kansas-city-se Refinishing over Replacement]</ref> |
||
Revision as of 10:22, 31 May 2020
 | This article's lead section may be too long. (May 2018) |
PVC Bendit is a tool that uses heat to soften PVC pipe from the inside. It consists of an electrical resistance heating element jacketed in a metal hose with a power supply cable. It is primarily used to bend PVC pipe, though it can also be used to bend other thermoplastic tubes and sheets. It works by bringing up the temperature of the pipe or sheet to the softening point of 176 degrees or higher.[1][2] Naturally, the longer the pipe is on the bender, the hotter and softer it will get. Once the pipe is softened, it can be formed into different shapes within the limitations of the material. When cooled, the pipe will retain all of the properties of the original material, but it will have additional stress on the points of the pipe that are stretched or compressed in the bending process.[3][4]
History
PVC Bendit was designed in late 2010 to early 2011 as a way to bend longer sections of pipe than were possible with other methods. The inventor, Victor Johnson of Manitou Springs, Colorado, was looking for a method to bend long sticks of clear PVC to make a lighting system, and he could not find a method to efficiently bend more than two feet of pipe at a time. After extensive research on the properties of the material, he devised and patented this system.
Applications
Bent PVC by any method can be used for a wide variety of tasks: fitting-mitigation in plumbing[5] and electrical applications,[6] greenhouses,[7][8] furniture,[9] assistance with activities of daily living, toys, games, art, refrigeration systems, etc.
References
- ^ "Plastic Properties of Polyvinylchloride (PVC)". dynalabcorp.com. Dynalab corp. Archived from the original on 29 March 2014. Retrieved 26 March 2014.
- ^ "Heat Distortion Temperature (softening temperature)". pvc.org. Retrieved 26 March 2014.
- ^ "Archived copy". Archived from the original on 2014-08-21. Retrieved 2014-08-20.
{{cite web}}: CS1 maint: archived copy as title (link) - ^ Refinishing over Replacement
- ^ Plumbing and PVC bending. Harrison Plumbing and Heating. 2014. Retrieved 26 March 2014.
- ^ "Offsets". porcupinepress.com. Dennis Lackey. Retrieved 26 March 2014.
- ^ Fletcher, Nancy. "Gardening in America Greenhouse, Fifty-eight dollars". electricscotland.com/. Electric Scotland. Retrieved 26 March 2014.
- ^ Constructing a Simple PVC High Tunnel.
- ^ http://www.pvcworkshop.com/Furn3.jpg
http://www.pvcstripcurtainsuk.uk