Alginic acid

Alginic acid

Names
Other names Alginic acid, E400
Identifiers
CAS Number	9005-32-7 Y
ChemSpider	none
ECHA InfoCard	100.029.697
EC Number	232-680-1
E number	E400 (thickeners, ...)
UNII	8C3Z4148WZ N
CompTox Dashboard (EPA)	DTXSID601010868
Properties
Chemical formula	(C6H8O6)n
Molar mass	10,000 – 600,000
Appearance	white to yellow, fibrous powder
Density	1.601 g/cm3
Acidity (pKa)	1.5–3.5
Pharmacology
ATC code	A02BX13 (WHO)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Macrocystis pyrifera, the largest species of giant kelp

Alginic acid, also called algin or alginate, is an anionic polysaccharide distributed widely in the cell walls of brown algae, where through binding with water it forms a viscous gum. Its colour ranges from white to yellowish-brown. It is sold in filamentous, granular or powdered forms.

Structure

Alginic acid is a linear copolymer with homopolymeric blocks of (1-4)-linked β-D-mannuronate (M) and its C-5 epimer α-L-guluronate (G) residues, respectively, covalently linked together in different sequences or blocks. The monomers can appear in homopolymeric blocks of consecutive G-residues (G-blocks), consecutive M-residues (M-blocks) or alternating M and G-residues (MG-blocks).

Forms

Alginates are refined from brown seaweeds. A wide variety of brown seaweeds of the phylum Phaeophyceae are harvested throughout the world to be converted into the raw material commonly known as sodium alginate. Sodium alginate has a wide use across a wide variety of industries including food, textile printing and pharmaceutical. Dental impression material utilizes alginate as its means of gelling. Alginate is both food and skin safe.

Seaweeds can be classified into three broad groups based on pigmentation: brown, red and green. These broad groups are the Phaeophyceae, Rhodophyceae and Chlorophyceae, respectively. Brown seaweeds are usually large, and range from the giant kelp Macrocystis pyrifera that is often 20 m long, to thick, leather-like seaweeds from 2–4 m long, to smaller species 30–60 cm long. None of the usual seaweeds for alginate production are cultivated. They cannot be grown by vegetative means, but must go through a reproductive cycle involving an alternation of generations. This makes cultivated brown seaweeds too expensive when compared to the costs of harvesting and transporting wild seaweeds. The only exception is for Laminaria japonica, which is cultivated in China for food but the surplus material is diverted to the alginate industry in China.

Alginates from different species of brown seaweed often have variations in their chemical structure, resulting in different physical properties. For example, some may yield an alginate that gives a strong gel, another a weaker gel; one may readily give a cream/white alginate, another may give that only with difficulty and is best used for technical applications where color does not matter.

Commercial varieties of alginate are extracted from seaweed, including the giant kelp Macrocystis pyrifera, Ascophyllum nodosum, and various types of Laminaria. It is also produced by two bacterial genera Pseudomonas and Azotobacter, which played a major role in the unravelling of its biosynthesis pathway. Bacterial alginates are useful for the production of micro- or nanostructures suitable for medical applications.

The chemical compound sodium alginate is the sodium salt of alginic acid. Its empirical formula is NaC₆H₇O₆. Sodium alginate is a gum, extracted from the cell walls of brown algae.

Potassium alginate is a chemical compound that is the potassium salt of alginic acid. It is an extract of seaweed. Its empirical chemical formula is KC₆H₇O₆.

Calcium alginate, made from sodium alginate from which the sodium salt has been removed and replaced with calcium, has the chemical formula C₁₂H₁₄CaO₁₂.

Production

The processes for the manufacture of sodium alginate from brown seaweeds fall into two categories: 1) Calcium alginate method and, 2) Alginic acid method. The chemistry of the processes used to make sodium alginate from brown seaweeds is relatively simple. The difficulties of the processes arise from the physical separations which are required, such as the need to filter slimy residues from viscous solutions or to separate gelatinous precipitates which hold large amounts of liquid within the structure and which resist filtration and centrifugation.

Uses

Alginate absorbs water quickly, which makes it useful as an additive in dehydrated products such as slimming aids, and in the manufacture of paper and textiles. It is also used for waterproofing and fireproofing fabrics, It is used in the food industry as a thickening agent for drinks, ice cream and cosmetics and as a gelling agent for jellies.

Alginate is used as an ingredient in various pharmaceutical preparations, such as Gaviscon, in which it combines with bicarbonate to inhibit reflux. Sodium alginate is used as an impression-making material in dentistry, prosthetics, lifecasting and for creating positives for small-scale casting.

Sodium alginate is used in reactive dye printing and as a thickener for reactive dyes in textile screen-printing. Alginates do not react with these dyes and wash out easily, unlike starch-based thickeners.

As a material for micro-encapsulation.

Calcium alginate is used in different types of medical products including skin wound dressings to promote healing and can be removed with less pain than conventional dressings.

See also

• Hyaluronic acid: a similar polysaccharide in animals.
• Agar

External links

• More details about Alginate. Alginate manufacturer KIMICA [1]
• Alginate seaweed sources
• Alginate properties
• article Wired on Easy Cheese, describing sodium alginate