Jump to content

Solar power in Spain: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
→‎Photovoltaics: added para
Line 20: Line 20:
The new cell lines use innovative screen-printing technology. By fully automating wafer handling, the manufacturing lines will be able to handle the very thinnest of wafers available and ensure the highest quality.
The new cell lines use innovative screen-printing technology. By fully automating wafer handling, the manufacturing lines will be able to handle the very thinnest of wafers available and ensure the highest quality.
[http://www.renewableenergyaccess.com/rea/news/story?id=47861] This is of particular importance since there has been a silicon shortage in recent years.
[http://www.renewableenergyaccess.com/rea/news/story?id=47861] This is of particular importance since there has been a silicon shortage in recent years.

Since the beginning of 2007, Aleo Solar AG has also been manufacturing high-quality solar modules for the Spanish market at its own factory in Santa Maria de Palautordera near Barcelona.[http://www.renewableenergyaccess.com/rea/news/story?id=47935]


==See also==
==See also==

Revision as of 12:17, 30 March 2007

The Spanish government is committed to achieving the target of 12 percent of primary energy from renewable energy by 2010 with an installed solar generating capacity of 400 megawatts. Spain is one of the most attractive countries with regard to the development of solar energy, as it has the greatest amount of available sunshine of any country in Europe. Spain is the fourth largest manufacturer in the world of solar power technology and exports 80 percent of this output to Germany.[1]

Through a ministerial ruling in March 2004, the Spanish government removed economic barriers to grid-connection of renewable energy. The widely applauded Royal Decree 436/2004 equalises conditions for large-scale thermal and photovoltaic plants and guarantees feed-in tariffs. [2]

Solar thermal power plants

Two 50 MWe solar thermal trough power plants, AndaSol-1 and AndaSol-2, are being promoted jointly by ACS Cobra and the Solar Millennium group in the region of Andalucia, each with a 510,120 m² solar collector field and six hours’ thermal storage. The AndaSol-1 project obtained financial closure in May 2006 and has received a €5 million grant from the European Commission’s (EC) Fifth Framework Programme, along with financial support from the German Federal Ministry for Environment. Construction started in July 2006 and will be completed in 2008. [3]

A 15 MWe solar-only power tower plant, the Solar Tres project, is in the hands of the Spanish company SENER, employing United States molten salt technologies for receiver and energy storage. Its 16-hour molten-salt storage system will be able to deliver power around the clock. The Solar Tres project has received a €5 million grant from the EC’s Fifth Framework Programme. [4]

Solar thermal power plants designed for solar-only generation are ideally matched to summer noon peak loads in prosperous areas with significant cooling demands, such as Spain. Using thermal energy storage systems, solar thermal operating periods can even be extended to meet base-load needs. For example, the 50-MWe AndaSol solar trough power plants are designed with six to twelve hours of thermal storage, which increases annual availability by some 1,000 to 2,500 hours. [5]

Photovoltaics

A 20MW photovoltaics (PV) power plant is being built in Beneixama.[6]

BP Solar has begun constructing a new solar photovoltaic (PV) solar cell manufacturing plant at its European headquarters in Tres Cantos, Madrid. [7] For phase one of the Madrid expansion, BP Solar is aiming to expand its annual cell capacity from 55 megawatts (MW) to around 300 MW. Construction of this facility is underway, with the first manufacturing line expected to be fully operational this year. [8]

The new cell lines use innovative screen-printing technology. By fully automating wafer handling, the manufacturing lines will be able to handle the very thinnest of wafers available and ensure the highest quality. [9] This is of particular importance since there has been a silicon shortage in recent years.

Since the beginning of 2007, Aleo Solar AG has also been manufacturing high-quality solar modules for the Spanish market at its own factory in Santa Maria de Palautordera near Barcelona.[10]

See also