Jump to content

Dallara GP3 cars

From Wikipedia, the free encyclopedia
(Redirected from Dallara GP3/16)
Dallara GP3/10
CategoryGP3 Series
ConstructorDallara
SuccessorDallara GP3/13
Technical specifications[1]
ChassisSandwich Carbon/aluminium honeycomb structure designed by Dallara
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)Same as front
Length4,471 mm (176 in)
Width1,885 mm (74 in)
Height1,063 mm (42 in)
Wheelbase2,780 mm (109 in)
EngineRace-tuned Renault B20F 2.0 L (122 cu in) inline-4 single-turbocharged, 6,500 rpm limited mid-mounted, rear-wheel-drive
TransmissionHewland 6 forward + 1 reverse sequential paddle shift
Power280 hp (209 kW)
Weight630 kg (1,389 lb) (including driver)
FuelElf LMS 89.6 MON, 101.6 RON unleaded
TyresPirelli P Zero
O.Z. racing wheels
front rims 13” x 10” wide
rear rims 13” x 12.5” wide
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut2010 Catalunya GP3 round
Last event2012 Monza GP3 round
RacesWinsPolesF/Laps
48484848
Constructors' Championships3
Drivers' Championships3

The Dallara GP3 cars were chassis for the GP3 Series as a feeder series for the parent GP2 series where Italian manufacturer Dallara also designs the chassis.

GP3/10

[edit]

The Dallara GP3/10 was a first generation car in the series. It debuted in May 2010 at Catalunya and had its final run in September 2012 in Monza. During its run, it claimed championship titles for Esteban Gutiérrez in 2010, Valtteri Bottas in 2011 and finally Mitch Evans in 2012 with ART Grand Prix winning the teams title on all accounts. It also helped 9 drivers successfully graduate into the GP2 parent series. Both Gutiérrez and Bottas made their F1 debuts in the 2013 Formula 1 season with Sauber and Williams respectively.

Each team was allowed to run three separate GP3/10's, and with a total of ten different teams and thirty cars on the grid, it was one of the largest grids in motor-sport making it a rather unstable class of racing. With the chassis to be taken over by the GP3/13 in 2013, the number of cars on track was limited to twenty seven.[2]

GP3/13

[edit]
Dallara GP3/13
CategoryGP3 Series
ConstructorDallara
PredecessorDallara GP3/10
SuccessorDallara GP3/16
Technical specifications[3]
ChassisSandwich Carbon/aluminium honeycomb structure designed by Dallara
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)same as front
Length4,620 mm (182 in)
Width1,872 mm (74 in)
Height1,043 mm (41 in)
Wheelbase2,880 mm (113 in)
EngineAER P57 3.4 L (207 cu in) naturally aspirated, rear mid-mounted, rear-wheel-drive
TransmissionHewland 6 forward + 1 reverse sequential paddle shift
Weight630 kg (1,388.9 lb) (including driver)
FuelElf LMS 89.6 MON, 101.6 RON unleaded
LubricantsElf HTX 840
TyresPirelli P Zero
O.Z. racing wheels
front rims 13” x 10”
widerear rims 13” x 12.5”
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut2013 Catalunya GP3 round
Last event2015 Yas Marina GP3 round
RacesWinsPolesF/Laps
52525252
Constructors' Championships3
Drivers' Championships3

The Dallara GP3/13 was the second generation in the series. The GP3/13 made its debut at the start of the 2013 season in Barcelona and it was in use for three seasons before being replaced by the Dallara GP3/16.

The 280bhp turbo-charged inline-4 engine that was used in the Dallara GP3/10 between 2010 and 2012 was upgraded to a 400bhp 3.4 litre (207 cu in) naturally-aspirated V6 unit,[4] with initial estimations suggesting that the chassis would be up to three seconds per lap faster than its predecessor,[5] which proved to be accurate during pre-season testing at the Autódromo do Estoril.[6]

GP3/16

[edit]
Dallara GP3/16
CategoryGP3 Series
ConstructorDallara
PredecessorDallara GP3/13
SuccessorDallara F3 2019
Technical specifications[7]
ChassisSandwich Carbon/aluminium honeycomb structure
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)same as front
Length4,620 mm (182 in)
Width1,872 mm (74 in)
Height1,043 mm (41 in)
Wheelbase2,880 mm (113 in)
EngineMecachrome V634 3.4 L (207 cu in) V6 95 degree naturally aspirated, rear mid-mounted, rear-wheel-drive
TransmissionHewland 6 forward + 1 reverse sequential paddle shift
Weight661 kg (1,457 lb) (including driver)
FuelElf LMS 89.6 MON, 101.6 RON unleaded
LubricantsElf HTX 840
TyresPirelli P Zero (dry) and Cinturato (wet)
O.Z. racing wheels
front rims 13” x 10”
wide rear rims 13” x 12.5”
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut2016 Catalunya GP3 round
Last event2018 Yas Marina GP3 round
RacesWinsPolesF/Laps
51512651
Constructors' Championships3
Drivers' Championships3

The Dallara GP3/16 was the third generation of the series. The GP3/16 made its debut at the start of the 2016 season in Barcelona, and remained in use until the final season of the GP3 Series in 2018.[8] The Dallara GP3/16 chassis was designed to replace the GP3/13 chassis in the 2016 season. Dallara began the development, design and construction of the GP3/16 chassis in mid-2014. The first chassis began assembly in July 2015, and was completed in September.[citation needed]

Chassis

[edit]

The Dallara GP3/16 car has a more radical design with the all-new F1-style lower nose, original rear wing, air ventilation in both sidepods and also engine cover. The "shark fin" engine cover was replaced by a more conventional design. The rear wing of all Dallara GP3/16 cars were slightly updated for the 2017 season due to the introduction of the Drag Reduction System (DRS) used in Formula One and Formula 2.[9]

Engine package

[edit]

The GP3/16 used a 3.4 L (207 cu in) V6 naturally-aspirated direct-injected fuel-efficient engine developed by Mecachrome Motorsport, replacing the P57 engine developed by Advanced Engine Research (AER) that was used in its predecessor, the GP3/13.

Aerodynamics

[edit]

The Dallara GP3/16 car would incorporate the Drag Reduction Systems (DRS) rear wing flap for the first time since 2017 season in a purpose for overtaking maneuver assist.

References

[edit]
  1. ^ "The Car". www.gp3series.com. GP3 Series.
  2. ^ "GP3 Series reveals new 400bhp car to be raced from 2013". Autosport.com. Haymarket Publications. 6 September 2012. Archived from the original on 11 September 2012. Retrieved 7 September 2012. GP3 plans to announce the nine teams that will compete in the category next year, with a limit of 27 cars on the grid. Michel also confirmed that the format of the calendar will remain unchanged next season, with eight double-headers running in support of F1.
  3. ^ "The Car". www.gp3series.com. GP2 Series Ltd.
  4. ^ "GP3/13 development car gets first shakedown". GP3 Series. GP2 Motorsport Limited. 12 July 2012. Archived from the original on 22 September 2012. Retrieved 28 August 2012.
  5. ^ "GP3 Series announce line up for 2013–15". GP3Series.com. GP2 Series Limited. 1 October 2012. Archived from the original on 4 October 2012. Retrieved 1 October 2012.
  6. ^ "Sainz Jr fastest as second generation GP3 car makes its debut". GP3Series.com. GP2 Series Ltd. 20 February 2013. Archived from the original on 23 February 2013. Retrieved 21 February 2013.
  7. ^ "The Car". gp3series.com. GP3 Series.
  8. ^ "New GP3/16 revealed in Monza - GP3 Series". gp3series.com. Retrieved 3 September 2015.
  9. ^ "DRS to be added to GP3 car for 2017 season". gp3series.com. GP3 Series. Retrieved 10 October 2016.
[edit]