Jump to content

Area codes 570 and 272

Coordinates: 41°25′05″N 76°06′47″W / 41.418°N 76.113°W / 41.418; -76.113
From Wikipedia, the free encyclopedia
(Redirected from 570 area code)
Area code 570Area code 716Area code 585Area code 607Area code 845Area codes 973 and 862Area code 908Area codes 410 and 443Area code 302Area codes 240 and 301Area codes 304 and 681Area codes 330 and 234Area code 440Area code 724Area code 878Area code 724Area code 814Area codes 272 and 570Area codes 610, 484, and 835Area code 856Area codes 215, 267, and 445Area codes 609 and 640Area codes 223 and 717Area code 412
Pennsylvania (blue) with numbering plan area 570 shown in red.

Area codes 570 and 272 are telephone area codes in the North American Numbering Plan (NANP) for the northeast quadrant of the U.S. state of Pennsylvania. The numbering plan area (NPA) includes the cities or towns of Scranton, Wilkes-Barre, Williamsport, Stroudsburg, East Stroudsburg, Pittston, Carbondale, Hazleton, Clarks Summit, Towanda, Bloomsburg, Sayre, Tunkhannock, Berwick, Milford, Montrose, Honesdale, Pocono Pines, Nanticoke, Tamaqua, Shavertown, Dallas, Mahanoy City, Sunbury, Jim Thorpe, and as far south as Pottsville and as far west as Lock Haven.

Area code 570 was created in 1998 in a split of area code 717, one of the original North American area codes. In 2013, the numbering plan area received a second area code, 272, creating an overlay plan, which required ten-digit dialing for the area.

History

[edit]

When the American Telephone and Telegraph Company (AT&T) organized the telephone networks of North American with a universal telephone numbering plan in 1947, Pennsylvania was divided into four numbering plan areas, including area codes 215, 412, 717, and 814. Area code 717 was assigned to the eastern half of Pennsylvania, excluding the Delaware and Lehigh Valleys.

Area code 570 was created when the 717 numbering plan area was divided on December 5, 1998. It was the first new Pennsylvania area code created outside Philadelphia and Pittsburgh since the implementation of the area code system.

In 2009, it was projected that 570 would run out of numbers in the third quarter of 2011. The Pennsylvania Public Utility Commission (PUC) considered four options: an overlay plan and three configurations of dividing. Two of the splits would have left Scranton and Wilkes-Barre, the two largest cities in the territory, with the same area code.[1] On July 15, 2010, the PUC decided that the new area code, 272, would be implemented as an overlay. The area code entered service on March 28, 2013. Ten-digit dialing became mandatory in northeastern Pennsylvania on September 21, 2013.[2]

In 2015, only eleven unassigned central office prefixes remained in 570. By 2017, only one exchange was left in February, and that exchange was assigned by May.

Service area

[edit]

Counties

[edit]

Locations are approximate. Area code 570/272 may only cover a portion of these counties, and it may spill into neighboring areas not listed.

Municipalities

[edit]

See also

[edit]

References

[edit]
  1. ^ "Archived copy" (PDF). Archived (PDF) from the original on 2013-10-01. Retrieved 2013-07-20.{{cite web}}: CS1 maint: archived copy as title (link)
  2. ^ Denise McCracken (March 28, 2013). "PUC Announces Ten-Digit Dialing Procedures Begin in 570 Area Code". pa.gov. Pennsylvania Public Utility Commission. Archived from the original on September 27, 2013.
[edit]
Pennsylvania area codes: 215/267/445, 412, 570/272, 610/484/835, 717/223, 724, 814/582, 878
North: 607
West: 814/582 area code 570/272 East: 845, 862/973, 908
South: 484/610, 717/223
New Jersey area codes: 201/551, 609/640, 732/848, 856, 908, 973/862
New York area codes: 212/646/332, 315/680, 516/363, 518/838, 585, 607, 631/934, 716/624, 718/347/929, 845/329, 914, 917

41°25′05″N 76°06′47″W / 41.418°N 76.113°W / 41.418; -76.113