Jump to content

Tetrathiafulvalene

From Wikipedia, the free encyclopedia
(Redirected from Δ2,2-bi-1,3-dithiole)
Tetrathiafulvalene
Skeletal formula of tetrathiafulvalene
Ball-and-stick model of the tetrathiafulvalene molecule
Names
Preferred IUPAC name
2,2′-Bi(1,3-dithiolylidene)
Other names
Δ2,2-Bi-1,3-dithiole
Identifiers
3D model (JSmol)
1282106
ChEBI
ChemSpider
ECHA InfoCard 100.045.979 Edit this at Wikidata
EC Number
  • 250-593-7
UNII
  • InChI=1S/C6H4S4/c1-2-8-5(7-1)6-9-3-4-10-6/h1-4H checkY
    Key: FHCPAXDKURNIOZ-UHFFFAOYSA-N checkY
  • InChI=1/C6H4S4/c1-2-8-5(7-1)6-9-3-4-10-6/h1-4H
    Key: FHCPAXDKURNIOZ-UHFFFAOYAZ
  • S1C=CSC1=C2SC=CS2
Properties
C6H4S4
Molar mass 204.34 g·mol−1
Appearance Yellow solid
Melting point 116 to 119 °C (241 to 246 °F; 389 to 392 K)
Boiling point Decomposes
Insoluble
Solubility in organic solvents Soluble[vague]
Structure
0 D
Hazards[1]
Occupational safety and health (OHS/OSH):
Main hazards
combustible
GHS labelling:
GHS07: Exclamation mark
Warning
H317
P261, P280, P302+P352, P333+P313, P363, P501
Related compounds
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Tetrathiafulvalene (TTF) is an organosulfur compound with the formula (C3H2S2)2. Studies on this heterocyclic compound contributed to the development of molecular electronics. TTF is related to the hydrocarbon fulvalene, (C5H4)2, by replacement of four CH groups with sulfur atoms. Over 10,000 scientific publications discuss TTF and its derivatives.[2]

Preparation

[edit]

The high level of interest in TTFs has spawned the development of many syntheses of TTF and its analogues.[2] Most preparations entail the coupling of cyclic C3S2 building blocks such as 1,3-dithiole-2-thion or the related 1,3-dithiole-2-ones. For TTF itself, the synthesis begins with the cyclic trithiocarbonate H2C2S2C=S (1,3-dithiole-2-thione), which is S-methylated and then reduced to give H2C2S2CH(SCH3) (1,3-dithiole-2-yl methyl thioether), which is treated as follows:[3]

H2C2S2CH(SCH3) + H[BF4] → [H2C2S2CH]+[BF4] + CH3SH
2 [H2C2S2CH]+[BF4] + 2 N(CH2CH3)3 → (H2C2S2C)2 + 2 [NH(CH2CH3)3]+[BF4]

Redox properties

[edit]

Bulk TTF itself has unremarkable electrical properties. Distinctive properties are, however, associated with salts of its oxidized derivatives, such as salts derived from TTF+.

The high electrical conductivity of TTF salts can be attributed to the following features of TTF:

TTF → TTF+ + e (E = 0.34 V)
TTF+ → TTF2+ + e (E = 0.78 V, vs. Ag/AgCl in CH3CN solution)

Each dithiolylidene ring in TTF has 7π electrons: 2 for each sulfur atom, 1 for each sp2 carbon atom. Thus, oxidation converts each ring to an aromatic 6π-electron configuration, consequently leaving the central double bond essentially a single bond, as all π-electrons occupy ring orbitals.

History

[edit]
Edge-on view of portion of crystal structure of hexamethyleneTTF/TCNQ charge transfer salt, highlighting the segregated stacking.[4]

The salt [TTF+
]Cl
was reported to be a semiconductor in 1972.[5] Subsequently, the charge-transfer salt [TTF]TCNQ was shown to be a narrow band gap semiconductor.[6] X-ray diffraction studies of [TTF][TCNQ] revealed stacks of partially oxidized TTF molecules adjacent to anionic stacks of TCNQ molecules. This "segregated stack" motif was unexpected and is responsible for the distinctive electrical properties, i.e. high and anisotropic electrical conductivity. Since these early discoveries, numerous analogues of TTF have been prepared. Well studied analogues include tetramethyltetrathiafulvalene (Me4TTF), tetramethylselenafulvalenes (TMTSFs), and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF, CAS [66946-48-3]).[7] Several tetramethyltetrathiafulvalene salts (called Fabre salts) are of some relevance as organic superconductors.

See also

[edit]

References

[edit]
  1. ^ "Tetrathiafulvalene". pubchem.ncbi.nlm.nih.gov.
  2. ^ a b Bendikov, M; Wudl, F; Perepichka, D F (2004). "Tetrathiafulvalenes, Oligoacenenes, and Their Buckminsterfullerene Derivatives: The Brick and Mortar of Organic Electronics". Chemical Reviews. 104 (11): 4891–4945. doi:10.1021/cr030666m. PMID 15535637.
  3. ^ Wudl, F.; Kaplan, M. L. (1979). "2,2′-Bi-L,3-Dithiolylidene (Tetrathiafulvalene, TTF) and its Radical Cation Salts". Inorganic Syntheses. Vol. 19. pp. 27–30. doi:10.1002/9780470132500.ch7. ISBN 978-0-470-13250-0. {{cite book}}: |journal= ignored (help)
  4. ^ D. Chasseau; G. Comberton; J. Gaultier; C. Hauw (1978). "Réexamen de la structure du complexe hexaméthylène-tétrathiafulvalène-tétracyanoquinodiméthane". Acta Crystallographica Section B. 34 (2): 689. Bibcode:1978AcCrB..34..689C. doi:10.1107/S0567740878003830.
  5. ^ Wudl, F.; Wobschall, D.; Hufnagel, E. J. (1972). "Electrical Conductivity by the Bis(1,3-dithiole)-bis(1,3-dithiolium) System". J. Am. Chem. Soc. 94 (2): 670–672. doi:10.1021/ja00757a079.
  6. ^ Ferraris, J.; Cowan, D. O.; Walatka, V. V. Jr.; Perlstein, J. H. (1973). "Electron transfer in a new highly conducting donor-acceptor complex". J. Am. Chem. Soc. 95 (3): 948–949. doi:10.1021/ja00784a066.
  7. ^ Larsen, J.; Lenoir, C. (1998). "2,2'-Bi-5,6-Dihydro-1,3-Dithiolo[4,5-b][1,4]dithiinylidene (BEDT-TTF)". Organic Syntheses{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 9, p. 72.

Further reading

[edit]